Specifications; Smart Diagnosis™ System - LG WT901CW Owner's Manual

Hide thumbs Also See for WT901CW:
Table of Contents

Advertisement

Available languages

Available languages

SPECIFICATIONS

Model WT901CW
Description
Electrical requirements
Max. water pressure
Dimensions
Net weight
Max. spin speed
SMART DIAGNOSIS™ SYSTEM
Should you experience any problems with your
washing machine, it has the capability of transmit-
ting data via your telephone to the Smart Diagno-
sis Team. This gives you the capability of speaking
directly to our specially trained technicians. The
technician records the data transmitted from your
machine and uses it to analyze the issue, providing a
fast and effective diagnosis.
USING THE SMART DIAGNOSIS™ SYSTEM
Follow the technician's instructions and perform the following steps when requested.
HOLD the mouthpiece of your phone over the power button, when instructed to do so by the call center, no more than
one inch from (but not touching) the machine.
NOTE: Do not press any other buttons.
PUSH and hold the WASH TEMP. button while continuing to hold your phone to the POWER button.
LISTEN for three beeps. After you hear the three beeps, release the WASH TEMP. button. Keep the phone in place
until the tone transmission has finished. This takes about 6 seconds, and the display will count down the time. Once
the countdown is over and the tones have stopped, resume your conversation with the technician, who will then be
able to assist you in using the information transmitted for analysis.
Smart Diagnosis™ is a troubleshooting feature designed to assist, not replace, the traditional method of
troubleshooting through service calls. The effectiveness of this feature depends upon various factors, in-
cluding, but not limited to, the reception of the cellular phone being used for transmission, any external noise
that may be present during the transmission, and the acoustics of the room where the machine is located.
Accordingly, LG does not guarantee that Smart Diagnosis™ would accurately troubleshoot any given issue.
Top-Loading Washer
120 VAC @ 60 Hz.
14.5 - 116 PSI (100 - 800 kPa)
24 7/8"(W) X 26 3/8"(D) X 40 1/8"(H), 54 3/4" (H with lid open)
63.2cm (W) X 67cm (D) X 102cm (H), 139cm (H with lid open)
103 lbs. (47kg)
700 RPM
SPECIFICATIONS/USING SMARTDIAGNOSIS™
If you experience problems with your washer, call
1-800-243-0000. Only use the Smart Diagnosis System
when instructed to do so by the Smart Diagnosis Team.
The transmission sounds that you will hear are normal
and sound similar to a melody.
Smart Diagnosis cannot be activated unless your
washing machine is turned on by pressing the POW-
ER button. If your washing machine is unable to turn
on, then troubleshooting must be done without us-
ing Smart Diagnosis.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents