Asus maximus viii formula User Manual page 95

BCLK Frequency : DRAM Frequency Ratio [Auto]
[Auto] The BCLK frequency to DRAM frequency ratio will be set to the optimized
setting.
[100:133] The BCLK frequency to DRAM frequency ratio will be set to 100:133.
[100:100] The BCLK frequency to DRAM frequency ratio will be set to 100:100.
DRAM Odd ratio Mode [Enabled]
This item allows you to enable, disable or automatically set the odd ratio to provide better
granularity.
Configuration options: [Disabled] [Enabled]
DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-800MHz] - [DDR4-4266MHz]
Xtreme Tweaking [Disabled]
This item may help improve some benchmarks performance.
Configuration options: [Enabled] [Disabled]
TPU [Keep Current Settings]
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings] Keep the current settings without changing anything.
[TPU I]
[TPU II]
Ensure to use water cooling device before selecting [TPU II].
EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU core/cache voltage and achieve the best energy
saving condition.
Configuration options: [Disabled] [Enabled]
CPU SVID Support [Auto]
Disable this item to stop the CPU from communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key. You can also select various Memory Presets to load
various settings suitably tuned for your needs.
ASUS MAXIMUS VIII FORMULA
Applies air cooling overclocking conditions.
Applies water cooling overclocking conditions.
3-13