Connect To Network; Wireless Setting; Wired Setting - Philips 55PFL6900 User Manual

Connect to network

Setup Network Connection Settings in order to use Net TV or Network
Upgrade functions.
•
The meanings of abbreviations are defined as below.
AP : Wireless LAN Access Point
WPS : Wi-Fi protected Setup
SSID : Wireless network name
•
The key entry screen will appear when you select SSID, WEP / WPA /
WPA2 or Proxy address.
Network settings
If your router has Wi-Fi protected Setup(WPS), select Easy Connect and press OK.
If you have non-WPS type devices in your router network, select Manual and press OK.
Text
a
. , @ ' b c
g h i j k l
p q r s t u v
WPS code c ode Easy Connect Easy Connect
_ ? ! -
abc ABC
•
Enter the key of the selected wireless network using H I J K, then
press OK.
Clear : Clear the entered number or word.
All clear : Clear all the entered numbers or words.
abc : Switch to the small letter mode.
ABC : Switch to the capital letter mode.
123+/; : Switch to the numeral and symbol mode.
Cancel : Shows the cancellation display.
OK : Set the entered number or word.
1
Press Q and use J K to Select Setup, then press OK.
2
Use H I J K to Select Connect to network, then press OK.
Network settings
This TV can be connected to Wireless
your home network.
Wired
Select your connection type.
Cancel
3
Adjust the following items.
d e f
OK
m n o
All clear
w x y z
Manual Manual
Cancel 12
123+/; Clear
12

Wireless setting

Select to use a wireless LAN to connect to the Internet by a wireless
connection.
1
Use H I to Select Wireless, then press OK.
2
Use J K to Select the desired Setting, then press OK, and follow the
On-screen Instructions.
Easy Connect
Scan
Manual entry
* WPS (Easy Connect) cannot be used when the security protocol is set
to WEP. Change the Access Point's security mode from WEP to WPA or
WPA2 (recommended).
3

Wired setting

Select to use an Ethernet Cable to connect to the Internet by a Wired
Connection. Please purchase Shielded Ethernet Cables at your local store
and use it when you Connect to Network equipment.
1
Use H I to Select Wired, then press OK.
•
Connection test will start automatically. L p. 41
3
Select this Setting if your Router has a Wi-Fi
Protected Setup (WPS) button. Start Scanning for
Wireless Networks on the TV after pressing the
WPS button on your Router. If Connection Test
fails, refer to the Router's Manual for more details.
Search for Wireless Networks automatically and
select the Wireless Network name (SSID) from the
list.
Set up the connection to the Wireless LAN Access
Point (AP) (e.g. Wireless Router) manually by
entering the Wireless Network name (SSID).
Continued on next page.
38
.
English