Performance Data Sheet; Interior Water Filter And Head - Haier HRF24E3APS Installation And User Manual

Table of Contents

Advertisement

Available languages

Available languages

PERFORMANCE DATA SHEET

INTERIOR WATER SYSTEM
MODEL DW2042F-09 CAPACITY 300 GALLONS (1,135.62 LITERS)
This system has been tested according to the NSF/ANSI Standard 42 for the reduction of the substances listed below. The concentration
of the indicated substances in water entering the filter was reduced to a concentration less than or equal to the permissible limit for water
leaving the system, as specified in NSF/ANSI Standard 42.
SUBSTANCE
REDUCTION
NSF REDUCTION
AESTHETIC
REQUIREMENTS
EFFECTS
Chlorine Taste/
>50%
Odor
Nominal
Particulate
>85%
Class III
>5 to <15 um
Test parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.50 gpm (1.89 Lpm). Pressure = 60 psig (413.7 kPa). Temp = 68°F to 71.6°F
(20°C to 22°C).
It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as
advertised.
The disposable water filter should be replaced at least every 6 months. Use replacement filter model DW2042FR-09. 2015 suggested
retail price of $44.99 U.S.A./$49.95 Canada. Prices are subject to change without notice.
The product is for cold water use only.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Refer to the Back Cover for the Manufacturer's name and telephone number.
Refer to the "Warranty" section for the Manufacturer's limited warranty.
APPLICATION GUIDELINES/
WATER SUPPLY PARAMETERS
Water supply
City or Well
Water Pressure
35- 120 psi (241 - 827 kPa)
Water Temperature
33° - 100°F (1°-38°C)
Service Flow Rate
0.50 gpm (1.89 Lpm.) @ 60 psi
* Test requirement is at least 10,000 particles/mL of ISO Coarse Test Dust.
® NSF is a registered trademark of NSF International.
16
System tested and certified by NSF International
against NSF/ANSI Standard 42 for the reduction
of Chlorine Taste and Odor, Particulate Class III.
INFLUENT
AVERAGE
CHALLENGE
INFLUENT
CONCENTRATION
2.0 mg/L
2.0 mg/L ± 10%
59,000
At least 10,000
particles/
particles/mL*
mL
MAXIMUM
AVERAGE
MINIMUM %
EFFLUENT
EFFLUENT
REDUCTION
0.05 mg/L
0.05 mg/L
46
95 particles/
particles/
mL
mL
AVERAGE %
REDUCTION
>97.4 %
>97.6 %
99.8%
99.9%

Advertisement

Table of Contents
loading

Table of Contents