How To Access Service Mode - Samsung HPS5053X/XAA (HP-S5053) Service Manual

Alignment & Adjustment

3-2 How to Access Service Mode

■ Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote buttons in this order; MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
4. Press the Power button to exit and store data in memory.
※ If you fail to enter service mode, repeat steps 1 and 2 above.
5. Initial SERVICE MODE DISPLAY State
HDMI/DTV HD
Calibration
Option Byte
White Balance
W/B Movie
SVP-PX
LBE
SOUND(STV825X)
Sub Micom Download
T-CADUNUS0H---12 Jan 2 2006
T-CADINUS5-0055[Sec :10]
※ "T-CADUNUS0H---12 Jan 2 2006" and "T-CADINUS5-0055" are firmware version.
The firmware version is subject to change without notice.
6. Buttons operations within Service Mode
MENU
Direction keys ▲ / ▼
Direction keys ◀ / ▶
Source
3-2
Checksum
S1406
KS1409
EEPROM Access Count
PDP Option
RESET
Full Menu Display / Move to Parent Menu
Item Selection by Moving the Cursor
Data Increase/Decrease for the Selected Item
Cycles through the active input source that are connected to the unit
Samsung Electronics