Specifications - Lectrosonics AM8 Instruction Manual

AM8
Specifications
Mic/Line Input
Type:
Impedance:
Input Gain Settings:
EIN, 20-20KHz:
Maximum Input Level:
Tone Controls:
Main Out
Impedance:
Max output level:
Direct Outputs
Impedance:
Max output level:
Remote Level Control Range:
Serial Communication (RS-232):
Compressor/Leveller
Threshold:
Maximum Gain Reduction:
Tone Controls (AM8TC):
Maximum System Gain
Input to Main Out:
System THD:
System IMD:
Frequency Response:
Phantom Power:
Power Consumption:
Weight:
Dimensions:
Specifications subject to change without notice.
This product meets the CE Compliance Standards - EN55022 and EN50082-1:1998. A copy of
the Declaration of Conformity may be requested from your dealer or by contacting the factory
directly:
Lectrosonics, Inc.
Marketing Department
581 Laser Rd. NE, Rio Rancho, NM 87124 USA
tel: 505-892-4501 fax: 505-892-6243 e-mail: marketing@lectrosonics.com
12
Electronically balanced and RF filtered
Greater than 2.5K, any gain setting
0dB, +30dB, +50dB
–126dBu (+50dB gain)
+20dBu at 0dB gain
–10dBu at +30dB gain
-30dBu at +50dB gain
Shelving controls
Turnover frequency 1kHz
+/– 10dB at 100 Hz;
+/– 10dB at 10 kHz
200 Ohms balanced; 100 Ohms unbalanced
+26dBu, 10k load
100 Ohms, unbalanced
+20dBu, 10k load
6dB/Volt from 0 to 5V, plus off
9600 baud, 8 data bits, no parity, 1 stop bit
–40dBu to 0dBu
25dB (10dB leveling, 15dB compression)
Shelving type
Turnover freq: 1 kHz
+/-10 dB at 100 Hz
+/-10 dB at 1kHz
82dB
Less than 0.1%, any gain setting
(+10dBu out)
Less than 0.1%, any gain setting
(+10dBu out)
25 Hz to 20 kHz +0, -1 dB
+15V, switch selectable per channel
10 Watts max at 20VAC
3 lbs, 4 ozs
19"wide x 1.75"high x 8"deep
LECTROSONICS, INC.