Using Voice Recognition; Initiating A Voice Session - Ford 2015 F-150 Owner's Manual

System data cannot be accessed without
special equipment and access to the
vehicle's SYNC module. Ford Motor
Company and Ford of Canada will not
access the system data for any purpose
other than as described absent consent, a
court order, or where required by law
enforcement, other government
authorities, or other third parties acting
with lawful authority. Other parties may
seek to access the information
independently of Ford Motor Company and
Ford of Canada. For further privacy
information, see the sections on 911 Assist,
Vehicle Health Report, and Traffic,
Directions and Information.

USING VOICE RECOGNITION

This system helps you control many
features using voice commands. This
allows you to keep your hands on the
wheel and focus on what is around you.

Initiating a Voice Session

Press the voice button. A list of
available voice commands
appears in the display.
E142599
Global Voice Commands
These voice commands are always
available. You can say them at any time.
F-150 (TFC) Canada/United States of America, enUSA, Fourth Printing
SYNC
Global voice commands
"Cancel"
"Help"
"Main menu"
Helpful Hints
• Make sure the interior of your vehicle is
as quiet as possible. Wind noise from
open windows and road vibrations may
prevent the system from correctly
recognizing spoken commands.
• Before giving a voice command, wait
for the system announcement to finish,
followed by a single tone. Any
command spoken before this does not
register with the system.
• Speak naturally, without long pauses
between words.
• You can interrupt the system at any
time while it is speaking by pressing the
voice button. You can cancel a voice
session by pressing and holding the
voice button.
404
This command
ends the voice
session. You can
also cancel a
session by holding
the voice button for
two or more
seconds.
This command
provides you with
hints, examples and
instructions.
This command
restarts the voice
session from the
initial starting point.