Table of Contents
Advertisement
rEmpty slots
f Make sure to attach a slot cover on the empty slot at the back of the device where the optional interface board is not
installed. Secure the cover using screws with toothed lock washers.
Make sure to use the slot cover and screws with toothed lock washers that have been attached the device. Also attach the
cover to the POWER SUPPLY attachment section if the optional POWER SUPPLY is not installed.
rPrecautions against damage due to static electricity
f Do not touch the connecting terminal directly. Doing so may damage parts due to static electricity.
Touch a metal object to discharge your body's static electricity before connecting signal cables to the device, the display
(projector or flat panel display), or external devices such as a video player.
Security
When using this product, take safety measures against the following incidents.
f Unauthorized operation of this product by a malicious third party
f Interfering or stopping of this product by a malicious third party
Take sufficient security measures.
f The connecting network must be secured by a firewall, etc.
f Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in
case you receive such inquiries.
DIGITAL LINK
"DIGITAL LINK" is a technology that uses a twisted-pair-cable to transmit video, audio, Ethernet, and serial control signals.
This device supports connection to DIGITAL LINK-compatible displays (projector, flat panel display) or to twisted-pair-cable
transmitters (receiver).
For DIGITAL LINK-compatible projectors and twisted-pair-cable transmitters of other manufacturers of which the operation has
been verified, refer to the Panasonic website (http://panasonic.net/avc/projector/), and for DIGITAL LINK-compatible flat panel
displays, refer to the Panasonic website (http://panasonic.net/prodisplays/).
Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation,
and not all the operations have been verified. For operation or performance problems caused by the devices of other
manufacturers, contact the respective manufacturers. The device does not support transmitting serial control signals.
DVI-U
The DVI-U terminal has the same connector type as the DVI-I terminal so it supports DVI digital, DVI analog, YC
S-Video (Y/C), and video (CV) signals
that you will be connecting.
To assure continued performance and FCC compliance, use only high quality DVI-D interface cable with two ferrite cores for
connecting with the <DVI-U INPUT> and <DVI-U SCALED OUTPUT> terminals.
*1 The optional Interface Board for DVI-U 2output (Model No.: ET-MCQDV150) does not support S-Video (Y/C) and video (CV) signal
output.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
Chapter 1 Preparation — Precautions for use
. You will need a separately-sold conversion adaptor depending on the external device
*1
C
/YP
P
,
B
R
B
R
ENGLISH - 13
Advertisement
Table of Contents
