Basic Operation; Projecting Image - Pioneer KURO KRF-9000FD Operating Instructions Manual

3

Projecting Image

This section describes the basic operations to project input images on the screen.
MENU
ENTER
TEST
WARNING
LAMP
STANDBY/ON
18

Basic Operation

Preparation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remove the lens cap.
A
B
EXIT
C
LIGHT
D
E
Insert the power plug to the power outlet
A Connect to this unit
B Connect to the power outlet
A
Power Cord
(Supplied)
Turn on the power
ON
You can also press the [STANDBY/ON] button on the unit to turn on the
power. (pP9)
Project the image
a
Select input mode
HDMI 1 HDMI 2 COMP.
VIDEO S-VIDEO
You can also select the input mode by pressing the [INPUT] button on
the unit. (pP9)
b
Play back the selected device
Adjust the position of the projection screen
See "Installing the Projector and Screen" for procedures on adjusting the
position. (pP16)
Adjust the image size (zoom) and the focus
a
Display the test pattern (crosshatch)
Press repeatedly
TEST
B
STANDBY/ON
Light on (Green)
STANDBY/ON
Light on (Red)