Teac cr-h101dab Owner's Manual page 23

Using the DAB menu
In DAB mode, use the DAB menu to access various functions.
1
In DAB mode, press the remote control MENU button.
2
Press the direction (l/;) buttons to select the menu
item you want, and press the SELECT button.
Local scan
The unit will scan the DAB bands between 10A and 13F and add the sta-
tions found to the station list.
Full scan (auto scan)
The unit will scan the DAB bands between 5A and 13F and add the stations
found to the station list.
Manual tune
This option allows you to manually tune in a station and view the strength
of the signal as it changes. This could be useful when adjusting or position-
ing an antenna for better reception.
Preset mode
Use this to select the DAB preset station you want.
DRC
Use this option to adjust the amount of Dynamic Range Control (DRC)
applied to received broadcasts. DRC is used to reduce the range between
high and low volumes of audio and is sometimes applied at the broadcast
source. Pop music might have a high value of DRC applied, appropriate
for constantly high listening levels, while classical music broadcasts might
have no DRC applied to allow the listener to hear the full dynamic range of
the source volume.
o You can select one of the three DRC settings: off, low, high.
When set to high, the broadcast DRC is applied. Set to low, only half
the broadcast DRC value is applied. Set to off, no DRC is applied.
Station order
You can set the order in which stations are listed.
Alphanumeric
This is the default order. Stations are listed by name with numbers first
and then alphabetically by station name.
Ensemble
Channels are listed by ensemble name.
Local scan
Full scan
Manual tune
Preset mode
DRC (Dynamic Range Control)
Station order
23