Using The Dvd Player; Playing A Disc; Controlling Disc Playback; Adjusting Dvd Player Settings - Insignia NS-20ED310NA15 User Manual

Using the DVD player

Most DVDs and your DVD player have region codes
that help control illegal distribution of DVDs. The
region code for your DVD player is 1. You can only
play DVDs with a region code of 1 or ALL. The region
code for a DVD is printed on the DVD or the DVD
packaging. See DVD player
compatible disc formats.
Warning
Keep your fingers clear of the disc slot
when loading or unloading a disc.
Neglecting to do so may cause serious
personal injury.
This section covers:

• Playing a disc

• Controlling disc playback

• Adjusting DVD player settings

• DVD on-screen menus
Playing a disc
Note
When you insert a disc into the slot, the
DVD player automatically pulls the disc
into the slot. You do not need to force the
disc into the slot.
1 Press (power) to turn on your TV.
2 Insert a disc into the disc slot with the label facing
the back of your TV. The picture next to the disc
slot shows how to insert a disc.
Playback begins automatically.
Notes
• If your TV is off when you insert a disc
or you switch to another video mode,
press DVD to switch back to the DVD
player.
• If a disc is not in the disc slot when you
switch to DVD mode, NO DISC appears
on the screen.
40
on page 79 for a list of
www.insigniaproducts.com
Controlling disc playback
• Press VOL+ or VOL– to adjust the volume.
• Press (pause) to pause playback. Press again or
(play) to resume playback.
• Press (skip back) to go to the previous chapter or
track. Press (skip forward) to go to the next
chapter or track.
• Press (fast reverse) to quickly move backward on
a disc. Press (fast forward) to quickly move
forward on a disc. Each time you press one of these
buttons, the speed changes. The speeds are 2 ×, 4×,
8×, 16×, 32×. Press
normal playback.
• Press (stop) once to stop playback. If you press
(play), playback resumes where the disc stopped.
Press (stop) twice. When you press
playback begins at the beginning.
Adjusting DVD player settings
1 While in DVD mode and with playback stopped or
no disc in the disc slot, press SETUP. The General
Setup Page menu opens.
2 Press or to select a setting or press
select another menu, then press OK.
3 Press or to select a setting, press
adjust the setting, then press OK.
4 Press to return to the top of the settings list if
you want to adjust more settings, or press SETUP
to close the menu.
20" 720p 60Hz LED DVD Combo TV
(play/pause) to resume
(play),
or
or to
to