Setup Menu - Panasonic SC-ALL70T Operating Instructions Manual

Setup menu

1 Press [SETUP] repeatedly to select
the setup item.
2 Press [4] [3] repeatedly to select
the desired setting and then press
[OK].
Dims the display after
5 seconds of inactivity.
DIMMER
ON
OFF
A beep sounds when you
touch the switch on the main
unit or when you turn the unit
on/off.
BEEP
≥ This works during muting as
well.
ON
OFF
The main unit automatically is
turned off if there is no audio
input and when you do not
use it for approx. 20 minutes.
ON
OFF
≥ When this is set, the display
shows "P.OFF 1" to indicate that
the main unit will turn off in
approximately 1 minute.
AUTO POWER
≥ If "BLUETOOTH STANDBY",
DOWN
"VIERA LINK" or "NET STANDBY"
is set to "ON", this function will
also be set to "ON". To change the
setting, set "BLUETOOTH
STANDBY", "VIERA LINK" and
"NET STANDBY" to "OFF".
(
– "AUTO POWER DOWN" is not
Sets the volume limit to 50
when you turn on the main
unit although the volume is
VOL
set to above 50 before it is
LIMITATION
turned off.
ON
OFF
30
SQT0935
30, 31)
indicated on the display when
"BLUETOOTH STANDBY",
"VIERA LINK" or "NET
STANDBY" is set to "ON".
This function allows you to
connect a paired Bluetooth
device when the main unit is
in standby mode.
ON
OFF
BLUETOOTH
The main unit will be turned
STANDBY
on automatically when you
connect a paired Bluetooth
device.
≥ If this function is set to "ON", the
standby power consumption will
increase.
Change the transmission
mode to prioritise
transmission quality or sound
quality. Make sure that the
Bluetooth
connected ("BLUETOOTH
LINK MODE
READY" is indicated on the
display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on sound
quality.
Turn on the VIERA Link
function.
ON
OFF
Select "OFF" when your
HDAVI Control device does
VIERA LINK
not work correctly with this
system.
≥ ARC will be disabled. Connect an
optical digital audio cable.
≥ Turn off all connected devices and
then turn them on again after
changing the setting.
You can add SC-ALL2 (sold
separately) to this system as
REAR
rear surround speakers.
PAIRING
≥ For details, refer to "Rear
surround" (
You can select to have 5.1 ch
output with rear surround
speakers (ON) or 3.1 ch
REAR
output without rear surround
SPEAKER
speakers (OFF).
ON
OFF
®
®
device is not
®
32)