Events - Leviton VRCPG User Manual

The PROFILE screen will display
with your newly created profile.
NOTE: Using the
select a profile will make it your
default profile and be displayed
on the HOME screen. Use the
side arrow buttons
toggle between profiles when on
the HOME screen. Default Profile will display when
none are selected. Use the
profile. NOTE: The scene feature is a special control
feature not guaranteed to be supported by normal
Z-Wave devices. If you experience problems with
®
programming and activating the scene mode for
devices, setup associations to use the AREA ON/
OFF action.
Selecting Events from the MAIN
MENU screen will bring you to the
EVENTS screen where you can
program up to 64 timed events.
An area can be set to MAX, ON/
OFF, or a SCENE command
for a desired time, a specified
recurrence or a value relative to
sunrise or sunset. The following
explains how to create an event:
With the selection box around
<< NEW >> press the center
button . You can name your
new event by pressing the center
to select 1. Event # 1
button
(refer to TEXT EDITOR pg. 9).
Once you name your new event,
press the center button
save and scroll to 2. Enabled
which allows you to ENABLE or
DISABLE your event. Use side
arrow buttons
Selecting 3. Action allows you to select the area you
wish to affect, the action that will take place (ON, OFF,
MAX or SCENE 1-255), and the Fade rate
(1 second - 127 minutes).
x1
12:00 PM
Mon 04. 07. 2008
Default Pr ofil e
Stand By Menu
button to
1
ON OFF
2
ON OFF
3
OFF
ON
4
ON OFF

EVENTS

to toggle.
8:35A
Mon 04.28.2008
x1
12:00 PM
Mon 04.07.2008
to
Stand By
Default Pr ofil e
Stand By Menu
button to deselect a
1
ON OFF
2
OFF
ON
3
OFF
ON
4
ON OFF
8:35A
Back
8:35A
1. Event #1
2. Enabled
3. Action
4. Recurrence
5. 12:00P
Cancel
8:35A
1. < Area #1 >
to
2. ON
3. Default Fade
Cancel
x1
- VRCPG -
8:35 AM
Default Profile
Menu
x1
EVENTS
<< NEW >>
Home
x1
EVENT
Save
x1
ACTION
Save
17