Asus GigaX 1124 Quick Installation Manual page 5

Table 3 LED indications in VCT mode
LED Color
3
SYSTEM Green
Red
4
1 – 24
STATUS Green
5
(Port Select)
6
SPEED Green
(Pairs 1, 3) Amber
DUPLEX Green
7
(Pairs 2, 4) Amber
NOTE. The number of lighted LEDs on Pairs 1 ~ 4 shows the distance
from the switch to the defective point (1 LED = 10 meters).
ASUS GigaX 1124
Status Description
On The switch is on.
On The switch is initializing or VCT is in
progress.
Off The switch is off.
Port numbers
On The port is selected to execute VCT.
Blinking VCT on the port is in progress.
Off The port is not selected.
On The pair is shorted.
On The pair is open (the cable is not attached
to any device).
Blinking The port failed to execute VCT.
Off VCT is in progress (PORT SELECT LED
is blinking)
OR
No error is found (PORT SELECT LED
is green)
On The pair is shorted.
On The pair is open (the cable is not attached
to any device).
Blinking The port failed to execute VCT.
Off VCT is in progress (PORT SELECT LED
is blinking).
OR
No error is found (PORT SELECT LED
is green).
5