Table of Contents
Advertisement
Using Your Range
Continued
The storage drawer
The storage drawer is for storing pots
and pans. The drawer can be removed
to make it easier to clean under the
range, and to check for installation of
the anti-tip bracket. Use care when
handling
the drawer.
Removing
the storage
drawer:
1. Empty drawer of any pots and pans
before removing drawer. Pull drawer
straight out to the first stop. Lift front
and pull out to the second stop.
2. Lift back slightly and slide drawer all
the way out.
Replacing
the storage
drawer:
1. Fit ends of drawer slide rails into
the drawer guides on both sides of
openrng.
2. Lrft drawer front and push In until
metal stops on drawer slrde rails
clear white stops on drawer guides.
Lrft drawer front again to clear
second stop and slide drawer closed.
To verify
the anti-tip
bracket
is engaged:
l
Remove the storage drawer.
l
Look to see if the anti-tip bracket is
attached to floor with screws,
l
Make sure one rear leveling leg is
positioned under the anti-tip bracket.
l
See Installation Instructions for
further details.
Optional door panel pat
If you would like to change the color
of your oven door glass to white or
almond, you can order one of these
kits: White (Kit No. 814069) or Almond
(Kit No. 614070) from your Whirlpool
Dealer. The kits include easy installa-
tion instructions.
Advertisement
Table of Contents
