Modem; Connecting The Camera Directly; To A Pppoe Modem - Samsung SNZ-5200 User Manual

Hide thumbs Also See for SNZ-5200:

Table of Contents

connectinG tHe camera DirectLy to a pppoe

moDem

Camera

1. Use the cross LAN cable to connect the network cable directly to your PC.

2. Run the IP Installer and change the IP address of the camera so that you can use

the web browser on your desktop to connect to the Internet.

3. Use the Internet browser to connect to the web viewer.

4. Move to [Setup] page.

5. Move to [network] – [DDnS] and configure the DDNS settings.

6. Move to [network] – [interface], and set the network type to [pppoe].

7. Connect the camera, which was removed from your PC, directly to the modem.

8. Restart the camera.

For registering the DDNS settings, refer to "Registering with DDNS". (page 62)

For configuring the DDNS settings, refer to "DDNS". (page 61)

For setting the network type, refer to "Interface". (page 59)

INTERNET

PPPoE Modem

DDNS Server

(Data Center, KOREA)

External Remote PC

English _21

Table of Contents