Asus RECO Smart Cam Quick Start Manual page 9

Connecting your RECO Smart Cam
1. Connect your USB cable
to the micro USB port of
your RECO Smart Cam.
2. Plug the other end of
your USB cable to the
dual USB car charger 1A
port.
3. Place the power cord
along the windshield
ceiling and front pillar of your vehicle, then secure it in place
with the self-adhesive clips.
NOTES:
• Your RECO Smart Cam comes with a dual car charger with
1A and 2.1A output, which makes it easier to power on and
charge other electronic devices at the same time.
• Disconnect your car charger when the engine is off.
• Use only the power adapter that came with your RECO Smart
Cam. Using a different car charger may damage your RECO
Smart Cam.
1
3
2
9