Improvements IMP-405-BR Owner's Manual page 7

1、Start and select working mode
Or POWER
Or
2、Setting room temperature
Or
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the RED Power button on the
supplied remote control.
Once the heater has been in operation and turned off with
the power button, the fan will continue running for 3 min
to cool the elements and dissipate remaining heat.
Select a heat setting.
Press the HEATER button on unit or remote, to toggle
between the two heat settings.
Power for high mode is 1500W; low mode is 1000W, and
both lights will turn off when using flame only feature.
Adjust the thermostat by pressing the arrows on the control
panel or up and down buttons on remote control.
Set temperature indication varies from 59℉ to 95℉，or
from 15℃ to 35℃. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press ℃/℉ button or remote and the digital display will
indicate Fahrenheit value or Celsius value.
When Fahrenheit indicating light's on, digital display
indicates Fahrenheit value,
When Celsius indicating light's on, digital display
indicates Celsius value.
7