Improvements IMP-405-BR Owner's Manual page 5

1、Power indication light: When master switch is turned on the power light will turn red,
pressing the power button will turn on the unit.
2、Power button: Powers the display on and off.
3、Signal-receiving window: For receiving remote control signal.
4、Low light: Low range mode indicator lights up for low-grade heat.(1,000 watts)
5、Heater button: Set the heater mode and turn on and off the heating function.
6、High light: High range mode indicator lights up for high-grade heat. (1,500 watts)
7、Digital LED display: Indicates set room temperature or time value setting in hourly
increments on the timer function. (This fireplace LED light panel has automatic shut
off function, after 5 seconds the display window will automatically turn off. Press the
up or down arrows on display panel or remote control and the LED display will
illuminate again to check the current function.)
8、 Celsius indicating light
9、 Fahrenheit indicating light
10、℃/℉Button (Button for alternating between Fahrenheit and Celsius).
11、 Down button：For setting temperature or time downward
12、 Up button: For setting temperature or time upward
13 、Timer button: Press button to set timer for the heater to turn on or off in hourly
increments.
14、Timer light: illuminates when timer feature is in use
15、Flame light button: Adjust the brightness of the flame
16、Flame light: illuminates when the flame is in use.
5