TFA 98.1087 Operating Instructions Manual page 9

TFA_No_98.1087_Anl_09/10
Radio controlled alarm clock with thermometer
4. How to operate
4.1 Manual setting of clock and calendar
• Hold "MODE" button for 3 seconds in normal mode
(time/temperature display). The hour digit is flashing. Press
"▼" or "▲" buttons to adjust hours. Holding "▼" or "▲" but-
tons, you will enter fast mode.
• The setting sequence is shown as follow: Hours, Minutes, Year,
Month and Day. Press "▼" or "▲" buttons to make the desi-
red settings.
• The instrument will quit the setting mode, if there is no but-
ton used within 30 seconds.
• The manually set time will be overwritten by the DCF time
when the signal is received successfully
• Press "▲" button to choose 12 HR or 24 HR system.
4.2 Day-of-week language
• Press and hold "▼" button. Language abbreviations change
from one language to another: English (EN), German (DE),
French (FR), Italian (IT), Spanish (SP).
4.3 Einstellung °C/°F
• If necessary select temperature display by "MODE" button:
16
09.09.2010 14:06 Uhr Seite 9
Radio controlled alarm clock with thermometer
• Press "WAVE" button to toggle between °C or °F as tempera-
ture unit.
4.4 Setting of time zone
• The time zone is used for the countries where the DCF signal can
be received but the time zone is different from the DCF time.
• Hold "▲" button for 3 seconds in normal mode (time/tempe-
rature display). "F" appears on the display. Hold "MODE" but-
ton for 3 seconds. The hour digit is flashing. Press "▼" or "▲"
button to adjust hours to your local time.
• Confirm with "MODE" button.
4.5 Alarm setting
• Select your desired alarm by "MODE" button:
1. Alarm 1: ALM 1
2. Alarm 2: ALM 2
• Set the alarm time in the desired alarm mode. Hold "MODE"
button for 3 seconds. The hour digits are flashing. Press "▼"
or "▲" button to adjust the time. Confirm with "MODE"
button. Set minutes in the same way. Confirm with "MODE"
button and the alarm is activated.
17