TFA 98.1014 Manual
  1. Manuals
  2. Brands
  3. TFA Manuals
  4. Alarm Clock
  5. 98.1014
  6. Manual

TFA 98.1014 Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

• Do not make or attempt to make any repairs to the alarm clock. Return it to its original point
of purchase for repair by a qualified engineer. Opening and tampering with the alarm clock
may invalidate its guarantee
SPECIFICATIONS
• Temperature measuring range: 0ºC to +50ºC
• Radio controlled time signal: DCF-77
• Power source: 1 x AA, IEC LR6, 1.5V battery
(Alkaline battery recommended)
• Battery life: approximately 12 months
• Dimensions (L x W x H): 102.5 x 48 x 69 mm
LIABILITY DISCLAIMER
• The manufacturer and supplier cannot accept any responsibility for any incorrect readings
and any other consequences that occur whenever an inaccurate reading takes place.
• This product is not to be used for medical purposes or for public information.
• The specifications of this product may change without prior notice.
• This product is not a toy. Keep out of the reach of children.
• No part of this manual may be reproduced without written consent of the manufacturer.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 98.1014 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TFA 98.1014

Summary of Contents for TFA 98.1014

  • Page 1 • Do not make or attempt to make any repairs to the alarm clock. Return it to its original point of purchase for repair by a qualified engineer. Opening and tampering with the alarm clock may invalidate its guarantee SPECIFICATIONS •...

  • Page 2: Replacing Batteries

    This unique feature enables to view four previously alarm set times including the current alarm 1 the keys are pressed and held down, then back-light will remain ON constantly until the key is time. To select the desired alarm time from a previously recorded alarm time without the need to released.

  • Page 3: Snooze Setting

    SNOOZE SETTING Press and hold the ALM1/HOUR key for about 2 seconds to enter the Alarm 1 setting mode To use the snooze feature, simply press the SNOOZE key when the alarm is sounding and th e (Alarm 1 time will start flashing). alarm will snooze from the start of next minute for 6 full minutes before automatically sounding Use the ALM1/HOUR key to set the hour and the ALM2/MIN key to set the minute.
  • Page 4 1. The distance of the alarm clock should be at least 1.5 - 2.0 meters away from interfering MANUAL TIME SETTING MODE sources such as computer monitors or TV sets. In some cases after inserting the battery, the alarm clock may not be able to receive the DCF -77 2.

  • Page 5: Radio Controlled Time

    • To exit the memory alarm mode • To display Alarm 2 time when press and hold the key for about 2 seconds • To exit the manual time setting mode ALM1/HOUR key • To exit the alarm setting mode •...

  • Page 6: Lcd Screen

    takes about 3 to 5 minutes. When the time signal is being received, both the time and ‘DCF- 77 Tower’ icon will be displayed on the alarm clock. 4. If reception is not successful within approximately 10 minutes, either manually set the time or wait for the clock to receive DCF time.
  • Page 7 MEMO ALARM CLOCK FEATURES • DCF-77 Radio controlled clock with manual setting options Operating Manual • 24 hour time display INTRODUCTION • Calendar display Congratulations on purchasing this state-of-the-art Alarm clock with radio controlled time. The • 2 independent alarm settings operation of this product is simple and straightforward and by reading this manual, users will •...

Table of Contents