Subscribe to Our Youtube Channel
Related Manuals for Klever Kleena K-Bot RX2
Summary of Contents for Klever Kleena K-Bot RX2
- Page 1 Klever Kleena User Instructions K-Bot RX2/RX3 K-Bot RX2 Pool Cleaner K-Bot RX3 8151289 8151289–K-Bot_RX2-RX3_2012.indd 1 15/2/2012 9:59 AM...
- Page 2 8151289–K-Bot_RX2-RX3_2012.indd 2 15/2/2012 9:59 AM...
-
Page 3: Table Of Contents
K-Bot RX2/RX3 User Instructions Contents 1. INTRODUCTION ............... 2 2. SPECIFICATIONS ..............2 3. WARNINGS AND CAUTIONS ........... 2 3.1. Warnings ................2 3.2. Cautions ................2 4. POOL CLEANER PARTS ............3 5. USING THE POOL CLEANER ............ 4 5.1. -
Page 4: Introduction
User Instructions 1. INTRODUCTION Thank you for purchasing a Klever Kleena Robotic Pool Cleaner. We are sure that your Robotic Pool Cleaner will provide you with reliable, convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface climbing brush enhance maximum pool hygiene. -
Page 5: Pool Cleaner Parts
4. POOL CLEANER PARTS Robotic Pool Cleaner Model K-Bot RX2 Robotic Pool Cleaner Model K-Bot RX3 Remote Control Unit Brushes Combined Brush Combined Brush Matches all pool terrains. Matches all pool terrains. Optional Brushes Optional Brushes PVC Brush Wonder Brush... -
Page 6: Using The Pool Cleaner
Remove them before use. While pushing in the handle buttons turn the ring so that the large projection on the ring lines up with the projection on the Pool Cleaner body. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 4 15/2/2012 10:00 AM... - Page 7 (1) lined up with the groove in the socket on the power supply and turning clockwise (2). Plug in the power supply and leave it in the OFF position. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 5 15/2/2012 10:00 AM...
-
Page 8: Putting The Pool Cleaner Into The Pool
Pool Cleaner to reach the farthest corner of the pool. Turn the power supply ON. The Pool Cleaner will now operate until it has reached the end of the cleaning cycle. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 6 15/2/2012 10:00 AM... -
Page 9: Removing The Pool Cleaner From The Pool
Using the handle remove the Pool Cleaner from the pool. DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE. CAUTION Place the Pool Cleaner on the edge of the pool and let the water drain out. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 7 15/2/2012 10:00 AM... -
Page 10: Cleaning The Filter Bag
Clean the filter bag with a hose. We recommend that you periodically wash the filter bag in a washing machine using the gentle cycle program. Periodically clean the brushes with a hose. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 8 15/2/2012 10:00 AM... -
Page 11: Replacing The Filter Bag
Unplug the power supply. CAUTION Using a screwdriver remove the two screws on the impeller cover and remove it. Clean any debris that may be in the impeller. K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 9 15/2/2012 10:00 AM... -
Page 12: Off Season Storage
• Roll up the cable so that it has no kinks (place on the Caddy if supplied) • Store the Pool Cleaner in a protected area either on its Caddy or simply upside down (not on its brushes) K-Bot RX2/RX3 User Instructions 8151289–K-Bot_RX2-RX3_2012.indd 10... -
Page 13: Troubleshooting
2. Clean the filter bag. 3. For K-Bot RX2 only: push in the float on the cable side (see figure A). 4. Check the brushes to see if they are obstructed or worn out. The Pool Cleaner floats 1. - Page 14 8151289–K-Bot_RX2-RX3_2012.indd 12 15/2/2012 10:00 AM...
- Page 15 8151289–K-Bot_RX2-RX3_2012.indd 13 15/2/2012 10:00 AM...
- Page 16 Klever Kleena Aquatight Pool Equipment Website: www.aquatight.com.au Email: info@autopool.com.au Perth (Head Office) 4/115 Belmont Ave, Belmont, WA, 6104 phone: (08) 9362 4022 fax: (08) 9361 3913 Sydney 35/15 Valediction Road, Kings Park, 2148 phone: (02) 9671 7041 fax: (02) 9671 7963...
Need help?
Do you have a question about the K-Bot RX2 and is the answer not in the manual?
Questions and answers