Klever Kleena K-Bot SX1 User Instructions

Klever Kleena K-Bot SX1 User Instructions

Saturn series

Advertisement

Robotic Pool Cleaner K-Bot SX1
EN
User Instructions .......................... p. 1
SATURN SERIES
8151665

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-Bot SX1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Klever Kleena K-Bot SX1

  • Page 1 Robotic Pool Cleaner K-Bot SX1 User Instructions ......p. 1 SATURN SERIES 8151665...
  • Page 2: Table Of Contents

    Robotic Pool Cleaner K-Bot Saturn Series SX1 User Instructions Contents 1. INTRODUCTION ..............2 2. SPECIFICATIONS ..............2 3. WARNINGS AND CAUTIONS ..........2 3.1 Warnings ................2 3.2 Cautions ................2 4. POOL CLEANER PARTS ............3 5. USING THE POOL CLEANER ........... 4 5.1 Setup .................
  • Page 3: Introduction

    Robotic Pool Cleaner K-Bot Saturn Series SX1 User Instructions 1. INTRODUCTION Thank you for purchasing your new K-Bot Pool Cleaner. We are sure that your Robotic Pool Cleaner will provide you with reliable, convenient and cost- effective pool cleaning, that includes filtration in all pool conditions with active brushing to enhance pool hygiene.
  • Page 4: Pool Cleaner Parts

    4. POOL CLEANER PARTS Robotic Pool Cleaner Model K-Bot Saturn Series SX1 Power supply unit Filtration - options Net Canister Ultra-Fine Filter Basket Filter Basket Net Panels included with SX1 SX1 Optional upgrade SX1 Optional upgrade Robotic Pool Cleaner K-Bot Saturn Series SX1 | User Instruction s...
  • Page 5: Using The Pool Cleaner

    5. USING THE POOL CLEANER 5.1 Setup Before using the Pool Cleaner for the first time, perform the following steps: 3m/10ft 5.1.1 Position the power supply so 5.1.2 Unwind the cable and stretch it out completely so that that it is approximately in the middle it has no kinks.
  • Page 6: Putting The Pool Cleaner Into The Pool

    5.2 Putting the Pool Cleaner into the pool 5.2.1 Put the Pool Cleaner into the pool. 5.2.2 Turn the power supply ON. Release the Pool Cleaner and let it sink to the floor The Pool Cleaner will now operate until it has of the pool.
  • Page 7 5.3.2 Using the floating cable, bring the Pool Cleaner to the pool’s edge. Using the handle, remove the Pool Cleaner from the pool. DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE. CAUTION 5.3.3 Place the Pool Cleaner on the edge of the pool and let the water drain out.
  • Page 8: Cleaning The Filter Basket

    6. CLEANING THE FILTER BASKET (SX1 optional upgrade) Make sure the power supply is switched off and unplugged. CAUTION It is highly recommended to clean the filter basket after each cleaning cycle. Note: Do not let the filter basket dry out before cleaning. 6.1 Cleaning after use - removing and cleaning the filter basket 6.1.1 Open the filter cover.
  • Page 9: Periodic Cleaning

    6.2 Periodic cleaning – recommended at least once a month Dismantle the 2 ultra-fine filter panels of the basket, according to the following steps: 6.2.1 Dismantle the 2 panels using your thumbs. 6.2.2 Clean the filter panels with a hose. 6.2.3 Assemble the filter panels.
  • Page 10: Cleaning The Net Canister

    7. CLEANING THE NET CANISTER (Included with SX1) Make sure the power supply is switched off and unplugged. CAUTION It is highly recommended to clean the net canister after each cleaning cycle. Note: Do not let the net canister dry out before cleaning. 7.1 Cleaning after use - removing and cleaning the net canister 7.1.1 7.1.2...
  • Page 11: Cleaning The Impeller

    8. CLEANING THE IMPELLER If you notice debris trapped in the impeller: Make sure the power supply is switched off and unplugged. CAUTION 8.1 Clean the debris trapped in the impeller opening, according to the following steps: 8.1.2 Using a short 8.1.1 If the debris is not reachable follow the next screwdriver open the...
  • Page 12: Off-Season Storage

    9. OFF-SEASON STORAGE If the Pool Cleaner will not be in use for an extended period of time, perform the following storage steps: • Make sure that no water is left in the Pool Cleaner • Thoroughly clean the filter basket and panels/canister and insert in place •...
  • Page 13 Robotic Pool Cleaner K-Bot SX1 Branch Locations: Perth Sydney Belmont Store Balkham Hills Store Ph: 08 9362 4022 Ph: 1300 656 956 Email: perth@autopool.com.au Email: sydney@autopool.com.au Melbourne Brisbane Scan Me Nunawading Store Archerfield Store Ph: 1300 656 956 Ph: 07 3277 4958 Email: melbourne@autopool.com.au...

Table of Contents