Miele NOVOTRONIC W 1986 Operating Instructions Manual page 47

The washing machine can be con-
nected to a potable water supply. A
non-return valve is not required unless
required by building code.
The washing machine has
3
hoses with / " female hose thread con-
4
nections.
If there is no water hookup contact a
plumber to install a connection.
Make sure that the sealing ring is
seated properly on the hose connector.
Only replace the hose with a genuine
Miele hose or with a hose able to with-
stand up to 145 psi (10 bar) pressure.
The water valve connector must also be
able to withstand 145 psi (10 bar).
1
/ " pressure
2
To protect the inlet valve, the two fil-
ters - one at the pressure hose /
valve connection and one at the inlet
connection to the solenoid valve -
must be in place during use.
43