Miele NOVOTRONIC W 1966 Operating Instructions Manual page 30

With the following guide, minor problems can be fixed without a service call.
To turn off the fault indicator light: Turn off the washer with the "On/Off" button
and turn the program selector to "End".
26
The washer has no
power.
The lock function is acti-
vated.
The drain is blocked.
The drain hose is too
high.
The water inlet is blocked. Open the water valve.
The inlet hose filter is
clogged.
There is a fault.
Check whether:
– it is plugged in.
– if the circuit breaker
has tripped.
Deactivate the lock
function.
Clean the lint trap and the
drain pump.
The maximum drain
pump height is 3 ft (1m).
Clean the filter under run-
ning water and carefully
remove any large parti-
cles.
Start the program one
more time. If the fault
message appears again
call Miele's Technical Ser-
vice Department.