Lighting loads may be an individual light fixture or a group
of light fixtures that are controlled by one dimmer or
switch.
Scenes are a collection of preferred settings that have
been configured to set selected lights to selected levels.
Change a Light Setting
To change a Light setting:
1.
2.
3.
4.
Activate a Lighting Scene
To activate a lighting scene:
1.
2.
44
On the Lights page, highlight the light or load you
want to control.
For Switches and Switch Loads: Press the Select
button to turn On of Off.
For Dimmers and Dimmable Loads: Press Select to
activate the slider, then:
For incremental changes: Use the arrow keys to
move the slider up or down.
For 100% On or Off: Use the Page Up and Page
Down to move the slider to 100% and 0%
respectively.
When finished, choose the on-screen Back button.
On the Lights page, highlight the scene you want to
activate. The scene should be applied immediately.
When finished, choose the on-screen Back button.
Need help?
Do you have a question about the On-Screen Navigator and is the answer not in the manual?