Change Location - Control 4 On-Screen Navigator User Manual

Change Location

NOTE: A default room for On-Screen Navigator should
have been set by your installer. If the location is correct,
skip to the next section.
NOTE: If the Location field is empty, then On-Screen
Navigator is not connected to a Director. To resolve this,
see "Connect to a Director" on page 49.
1.
6
On the Home page, highlight the current room name
displayed (upper-left) and then press Select.
A list of the additional floors and/or rooms available
for control is displayed. Here are two sample lists:
One for a multi-level site and the other a multi-room.