Miele G 7883 Operating Instructions Manual page 47

– The drain hose is
kinked.
– The drain pump is
blocked.
This machine has a
resettable heater
limiter, which will
switch off the heater
in case of
over-heating. This
could be caused if
large articles cover
the heating elements,
or if the filters in the
wash cabinet are
blocked.
– Turn the program selector to
"Stop" f (the fault code
goes out).
– Press the "On/Off" button to
turn the machine off.
– Remove any kinks in the
hose. Clean the drain pump
(see "Machine care").
– Turn the machine on, run the
drain program then restart
the original program (see
Operation").
– Remove the cause of the
fault.
– Remove the service panel
(see "Electrical connection").
– Press the reset button on the
temperature sensor on the
right side.
47