CEILING SPEAKERS
VMiS6 / VMiS8
INSTALLATION GUIDE
2013 COLLECTION
CEILING SPEAKERS
VMiS6 / VMiS8
VM Audio Tech Support
US / Canada
phone: (855) audio-99 / (855) 283-4699
email: help@vmaudio.com
© VM Audio All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
1. Content
(2) Ceiling Speakers
Rev. 1
2. Preparing
Installation
• Ceiling installation should be located directly above the
listening area. In rooms larger than the bathroom or closet,
it is recommended to install additional speakers for better
performance.
• You may install a bracket where you will be placing the
speaker prior to installing drywall. Once insulation and drywall
is installed, you may cut the speaker hole.
• Use a stud-finder to locate the nearest wood or metal stud
and keep in mind the baffle flange will protrude outside of the
mounting hole.
Painting The Ceiling Speakers
• It is recommended to paint your speaker before installing into
your ceiling, or reverse the steps of installation to remove
the speaker for easy painting. For painting the installed
speaker, please use the paint mask in place of the grille. If
painting the grille, do not paint while attached to the speaker,
and be careful to not clog the holes, which will decrease
sound quality. VM Audio recommends only light spray
painting.
3. Location
1. Choose a location in your home to setup your new
VM Audio ceiling speaker.
Note: Keep in mind of the electrical and plumbing, make
sure the location of the speaker will not interfere with these
when installing.
4. Cutout
1. Using the included template, position and outline the hole
on the ceiling.
2. Cut the hole using a drywall saw.
Note: Be sure there are no obstacles in the cutting area.