Notes Congratulations on your purchase of an Elux Series product from VM Audio. You have seen that with years of acquired taste for quality, the Elux Series has the right design and performance to satisfy your utmost demand. With music...
Notes Table of Contents Welcome Table of Contents Warning Precautions System Features Included Overview Connections Settings & Adjustments Operation Speaker Placement Troubleshooting Warranty Specifi cations...
Warning! Specifi cations EXAT11-CR-BK WARNING Loudspeaker Type Full Range System RISK OF ELECTRIC Cabinet Color Cherry-Black SHOCK High Frequency 1 1/2” Composite Soft Dome Midrange Driver 4” Treated Composite Fiber To prevent fi re or electric shock: Bass Driver 8” Dual Pulp Cone •...
Specifi cations Precautions On Safety EXAT10-BK • Contact between bare speaker wires may result in a short-circuit. • Should any liquid or solid object fall into the speaker Loudspeaker Type Full Range System system, unplug the system’s power cord and have the Cabinet Color Black system checked before operating it any further.
• WMA / MP3 Music File Compatibility Warranty Turnaround Time • Bass, Treble, Mic, Echo & Volume Adjustments It is VM Audio’s goal to turnaround the merchandise in a timely • Built-In Digital Control POD fashion of 1 week. Unexpected delays may occur due to repair parts or replacement shortage.
Limited Warranty Agreement Included Your product is covered by a limited warranty by VM Audio as Review the contents of the package and make sure the established below: following items are included: Electronics Limited Warranty Products purchased from an Authorized VM Audio Dealer are...
Overview Troubleshooting Front View No Power • Press the Power/Standby button to turn power on. • Make sure unit is connected to AC power. No Sound • Raise volume to check output. • Volume ON from the audio source might be muted or low. •...
Page 9
Speaker Placement Overview Placement Rear View The speakers should be placed within a 1.5 meter and 3 meters apart. You should position your speakers so that each one is at least 0.5 meter away from any bare wall. Improving Sound Quality The speaker system allows for an extensive amount of settings that are user-friendly.
Page 10
Overview Operation Side View Using Microphone Step 1: Connect the microphone to the input plug on the Level Control Panel. Digital Control Side Panel Control Step 2: Adjust the microphone level (see page 28). Step 3: Adjust the ECHO level (see page 29). Caution •...
Page 11
Operation Overview Using USB/SD Audio Source Top View Step 1: Insert the USB drive or SD card to it’s corresponding USB or SD port on the Digital Control POD. Step 2: Music playback will begin automatically. Step 3: Search select MUSIC_BTO1 Step 4: Adjust VOLUME level (see page 24).
Page 12
Overview Operation Level Control Panel Using AUX Audio Source Step 1: Select AUX as the audio INPUT source if it is not already selected (see page 23). Step 2: Start audio source and play track (refer to the audio source’s user guide for instructions). Step 3: Adjust the VOLUME level (see pages 24-25).
Page 13
Settings & Adjustments Overview Sleep Function Amplifi er Back Plate Use SLEEP feature to put speaker system in Stand-by mode at a predetermined time. You can set time in 10 minute intervals. Audio Input Jacks Speaker Output 1. Press SLEEP repeatedly until the desired time is reached and it appears in the Digital Control POD display.
Page 14
Overview Settings & Adjustments Digital Control POD EQ Presets Four equalizer presets are available to customize the sound (Pop, Jazz, Rock, Classic). Note Function only available when USB/SD input is selected. 1. Repeatedly press Remote the EQ button to cycle through the EQ options (EQ1, EQ2, EQ3, EQ4) 2.
Page 15
Settings & Adjustments Overview Pausing Music Playback Digital Control POD Functions Function only available when BLU (Bluetooth) or USB/SD Input selector / On-OFF wake button. input is selected. Tone control selector button. Play / Pause control button. Reverse skip function / Volume down button. Using Control POD Forward skip function / Volume up button.
Page 16
Overview Settings & Adjustments Remote Repeat Play This function allows you to “shuffl e” tracks and play in random order. Random Order Play While the track you want is playing, press REPEAT until “ANd” appears on the display in the Digital Control POD. All the tracks in USB drive or SD card will play in random order continuously.
Page 17
Settings & Adjustments Overview Repeat Play Remote Function Buttons This function allows you to repeat one track, shuffl e tracks System On-OFF wake. (play in random), and continuous play all the tracks in a loop Input selector switch. when in USB/SD or Bluetooth is use. Play / Pause control function.
Connections Settings & Adjustments Speaker Wire Connection Direct Access Play This function allows quick access to tracks by entering their Right Speaker track number. Track number can be entered at any time during playback. Function only available when BLU (Bluetooth) or USB/SD input is selected.
Page 19
Settings & Adjustments Connections Choosing Music File To Play Speaker Wire Connection Function only available when BLU (Bluetooth) or USB/SD Left Speaker input is selected. Using Control POD 1. Press the >>l + button to go to the next track or forward skip tracks until the track number you want appears on the display...
Page 20
Connections Settings & Adjustments Adjusting Echo Level Connection Audio Source Be sure to turn off the power of each component before Using Level Control Panel making the connections. When connecting the RCA cable, be sure to match the color-coded cord to the appropriate jacks on the components.
Page 21
Settings & Adjustments Connections Adjusting Microphone Level Power Cord Connection Using Level Control Panel Turn TREBLE knob Connect this power cord nect this power cord clockwise to increase, after all other cables and fter other cables counterclockwise to cords are connected. cords connecte ted.
Settings & Adjustments Settings & Adjustments Turning Speaker System On Adjusting Tone Quality • Volume level will automatically self adjust to 45 and it will This function is only available when AUX input is selected. display on the LED screen. •...
Page 23
Settings & Adjustments Settings & Adjustments Adjusting Tone Quality Source Input Selection Using Level Control Panel Use this function to select the desired input audio source. Adjusting Treble Adjusting Bass Using Digital Control POD Press INPUT repeatedly to select the desired audio source.
Page 24
Settings & Adjustments Settings & Adjustments Adjusting Volume Adjusting Volume Using Level Control Panel Using Digital Control POD This function is only available when AUX input is selected. Press VOL + to increase, VOL - to decrease volume. Turn VOLUME knob clockwise to increase volume, turn counterclockwise to...