Starting Up With Modemlink - Atari 1030 Owner's Manual

Starting Up With ModemLink
If you have an ATARI400™, ATARI800™, or ATARI
1200XLTM Computer, ModemLink loads automatically into
your computer -all you need to do is turn on your
modem, then turn on your computer. To load ModemLink
when you have a language cartridge-such as ATh.RI
BASIC or PILOT- plugged into your computer, first turn
on your modem, then the computer; then type DOS and
press
IlmI!l'iD'
If you have an ATARI600XLTM or ATARI800XLTM Com-
puter with built-in BASIC, first turn on your modem,
then-while holding down the
I+l:iimD
key-turn on your
computer to load Modemhink. If your computer is
already on and you want to switch from BASIC to
ModemLink-or if you have a PILOT cartridge plugged
into your computer-type DOS and press
IiI!I!IB
to load
Modeml.ink.
When the ModemLink start-up screen appears, make
your selection by typing one of the numbers shown in in-
verse video (blue characters on a white background),
The words displayed in inverse video indicate the cur-
rent mode of operation,
NOTE: If you turn your computer off, you must wait
three seconds before reloading
Modeml.ink.