Electrical Data - Miele DA 326-1 i Operating And Installation Instructions

All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer can
not be held responsible for
unauthorized work.
Ensure that power to the appliance
is "OFF" while installation or repair
work is performed.
Verify that the voltage, load and circuit
rating information found on the data
plate (located behind the grease filter),
match the household electrical supply
before installing the hood.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Technical
Service.
USA 1-800-999-1360
CDN 1-800-565-6435
The hood comes equippped with a 5 ft
(1.5 m) power cord with a NEMA 5-15
molded plug for connection to a
120 VAC, 60 Hz, 15 A power outlet.
Maximum load
– DA 326-1 i. . . . . . . . . . . . . . . . . 365 W
– DA 329-1 i. . . . . . . . . . . . . . . . . 366 W
Light
– DA 326-1 i . . . . . . . . . . . . . . . 1 x 15 W
– DA 329-1 i . . . . . . . . . . . . . . . 1 x 16 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V
Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit rating. . . . . . . . . . . . . . . . . . 15 A
23