Installation; Retaining Plates - Miele DA211 Operating And Installation Instructions

Retaining plates

The ventilation system will be mounted
to the wall through the use of retaining
plates. Plate A is installed first,
followed by plate B. Plate C should only
be used if the distance between plate A
and plate B is greater than 14
(365 mm).
Attaching the retaining plates
to the wall
^ Before fitting the retaining plate draw
a vertical line centrally above the
cooktop on the rear wall.
^ Mark measurement S from the
cooktop surface upwards (see
3
/ "
"Appliance dimensions"). This marks
8
the height of the lower rim of the
hood.

Installation

31