Computer Requirements; Approvals; Fcc; Industry Canada - DigitalWay MPIO HD100 User Manual

HD-EU-Eng 4/9/97 11:50 AM Page 46

Computer Requirements

Your computer must meet the following minimum hardware and software
requirements to run the Music Explorer software:
• Pentium class processor 133 MHz or faster
• 64 MB RAM
• 20 MB free disk space plus space for ripping music files
• CD-ROM drive
• Windows 2000(Pro)/XP/ME/98 SE
• USB port enabled
• Internet connection for the lookup of artist, album and track informa-
tion prior to ripping music from an audio CD.

6. Approvals

FCC

This equipment has been tested and found to comply with the limita-
tions for a Class B digital device, pursuant to Part 15 of the FCC rules
and regulations. These limitations are designed to provide reasonable
protection against harmful interference within a residential installation.
This equipment generates, uses, and can radiate radio frequency ener-
gy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio and/or televi-
sion reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the one
to which the receiver is connected.
• Consult the dealer or an experienced radio and/or television techni-
cian for assistance.
46
English

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations ICES-003.
Cet appareil numerique de la classe B respecte toutes les exigencies
du Reglement sur le materiel brouilleur du Canada NMB-003.
CE
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following
European Norms (the equivalent international standards are in brack-
ets):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic
Immunity
• EN60950 (IEC950) - Product Safety
47
English