Samsung Galaxy core prime User Manual page 280


Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap Scan to search again.

This setting is available when Bluetooth is enabled.
●
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
paired device name, tap Rename, enter a new name, and tap OK.

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
●
Cancelling Pairing: From Bluetooth settings, tap Settings
and then tap Unpair.

This setting is available when Bluetooth is enabled.
●
Enable Service from Paired Device: From Bluetooth settings, tap Settings
device name, and then tap the listing under Profiles.

If a confirmation prompt appears, follow the onscreen instructions.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.

Tap the ON/OFF switch to turn the option on or off.
●
Search for Other Devices: From Bluetooth settings, tap Scan.

This setting is available when Bluetooth is enabled.
●
Set Visibility Timeout: From Bluetooth settings, tap More options
select an option.

Tap Never timeout to allow your phone always to be discoverable unless you turn off
discoverability.

This setting is available when Bluetooth is enabled.
●
Check Files Received via Bluetooth Transfer: From Bluetooth settings, tap More options
Received files, and follow the onscreen instructions.
Settings
next to a
next to a paired device name,
next to a paired
> Visibility timeout and
>
271