Before Using Your Kettle - Saeco 101167 Instruction Manual

BEFORE USING YOUR KETTLE

1. Remove the kettle from the packaging and position it on a dry, level, secure work
surface away from the edge.
2. Before connecting it to a power source, make sure that your power voltage is the same
as the one indicated on the base of the kettle. Connect the cord to a suitable power
socket. Make sure that the power cord does not overhang the work surface.
3. Remove the kettle from the power base and open the lid using the lid release switch.
Fill the kettle to the MAX mark. Make sure the kettle is not over-filled. Always compare the
water level against the water tank markings with the kettle positioned on the power base.
4. Close the lid and place the kettle back onto the power base.
5. Press the boil button.
Allow the kettle to boil the water and then discard it. Repeat this procedure twice.This will
remove any residue left from the manufacturing process. Remove and rinse the filter before
use. See "To Clean the Filter" section.