Summary of Contents for Saeco 101167
- Page 1 ELECTRIC KETTLE Model No: 101167 INSTRUCTION MANUAL READ THESE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE MACHINE AND STORE IN A SAFE PLACE FOR HOUSEHOLD USE ONLY...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and / or personal injury. Never touch hot surfaces. Always ensure your hands are dry before handling the plug or switching Never use this kettle outdoors. -
Page 3: Short Cord Instructions
Do not attempt to tamper with or alter this safety feature. CONTACT INFORMATION Please read the entire instruction manual thoroughly before operating your kettle. If you have questions after reading the enclosed information, please contact Saeco Customer Service for assistance. Saeco USA 7905 Cochran Rd. - Suite 100 Glenwillow, OH 44139 www.saeco-usa.com... - Page 4 FEATURES 1. Spout 2. Water Filter 3. Lid Release Switch 4. Control Panel 5. Digital Display 6. Temperature / Keep Warm Button 7. Boil Button 8. Power Base 9. Metal Lining 10. Water Carafe 11. Power Cord...
-
Page 5: Before Using Your Kettle
BEFORE USING YOUR KETTLE 1. Remove the kettle from the packaging and position it on a dry, level, secure work surface away from the edge. 2. Before connecting it to a power source, make sure that your power voltage is the same as the one indicated on the base of the kettle. -
Page 6: Using Your Kettle
USING YOUR KETTLE Conventional Boiling 1. With the kettle switched off, plug the power cord into a suitable power socket. The kettle will beep and the display will show LOW. 2. Remove the kettle from the power base before filling it with water. Open the lid using the lid release switch. - Page 7 USING YOUR KETTLE Keep Warm Mode The temperature / keep warm button can be used to select one of three temperatures 100°F, 150°F and 200°F. The keep warm mode will maintain the selected water temperature for up to 2 hours. 1.
- Page 8 USING YOUR KETTLE Boil Then Keep Warm Mode The kettle can be set to boil the water and then keep it at the selected temperature for up to two hours. 1. Press the temperature / keep warm button until the dot (•) on the display is lined up with the desired temperature.
-
Page 9: Cleaning The Filter
CLEANING Warning: Always unplug the kettle from the socket and allow it to cool completely before cleaning or descaling it. 1. Clean the exterior surface of the kettle with a damp cloth and then polish it with a soft dry cloth. Do not use steel wool pads or harsh/abrasive cleaners, which may damage the body.