Table of Contents
Advertisement
Instructions
Position the Digital Kettle on a firm level table or bench.
1.
Remove the kettle jug from the power base.
Open the lid by pressing lid release
2.
button on the handle. The lid will lift
upwards.
4.
Ensure the lid is closed by pushing it down until it locks in place.
Place the kettle onto the power
5.
base and plug the cord into a power
socket and switch on. The base will
beep four times.
NOTE: You can change the selected temperature by pressing any of the other settings
during heating. If you press the selected temperature button again, this will turn the
kettle off.
After Sales Support
1300 663 907
customercare@winplus.com.au
Fill with desired amount of water.
3.
The amount of water must always
be between the minimum and
maximum indicators.
Select the desired setting by
6.
pressing one of the five temperature
buttons. The selected button will
illuminate and beep once.
Model Number DKE2200
11
Advertisement
Table of Contents
