Building an Intelligent Device Platform Project Using Wind River
Gateway Development Kit DK100 Series
5. Select Platform as the build type as shown, and then click Next.
Figure 36.
Select Build Type
6. Type a name for your project, and then click Next.
Figure 37.
Specify Project Name
Important: You must enable
April 2015
Order No.: 330307-007
wr-idp
type. Make sure you correctly complete steps 7 - 8.
®
Workbench—Intel IoT
as an addon before selecting the RootFS
®
Intel
IoT Gateway Development Kit DK100 Series
Getting Started Guide
57