Sample "You Are Here - Intel DK100 Series Getting Started Manual

Iot gateway development kit

Hide thumbs

Table Of Contents

Table of Contents

For help with typing commands to your Linux terminal, use Intel

Development Kit DK100 Series - Getting Started Guide Commands at

downloadcenter.intel.com/Detail_Desc.aspx?

agr=Y&DwnldID=24331&lang=eng&wapkw=dk100. This text file includes all of the

commands in this Getting Started Guide. The purpose is to provide you with an easy

way to copy and paste commands to your Linux terminal.

Document Conventions

This document uses the following conventions:

•

"Development Kit" refers to the Intel

Series. This term includes the gateway hardware, the board firmware, and the

software from Wind River Systems, Inc.

•

"Target Device" refers to the gateway device onto which you will install Wind

River

•

"Host System" refers to a Linux system that you will use to configure your Target

Device. You will install development tools from Wind River Systems, Inc. on this

system. The Host System is not included in this kit.

The examples in this publication use a Host System that has an Intel

second generation processor and Ubuntu* Desktop 14.04 distribution software. If

you are using a different operating system, substitute the instructions in this

publication with instructions that are appropriate for your system.

•

This font is used for commands, API names, parameters,

filenames, directory paths, and executables.

•

Bold text is used for graphical user interface entries, buttons, and keyboard keys.

This font in a gray box is used for commands or scripts that you must type.

This font in a green box displays responses to your commands.

•

To help you keep track of your progress, illustrations are used at the beginning of

each key task. The following is an example of these illustrations.

— A white background indicates steps you have completed.

— A blue background indicates the step you are about to work on.

— A gray background indicates future steps.

Figure 5.