Toyota 2014 COROLLA Owner's Manual page 59

Installing child restraints using a seat belt
Rear-facing  Infant seat/convertible seat
■
1
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
2
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
3
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
4
While pushing
restraint system down into
the rear seat, allow the
shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
COROLLA_TMMMS_TMMC_U (OM12F00U)
1-1. For safe use
the child
59
1