Toyota 2014 COROLLA Owner's Manual page 165

 Vehicles with a multi-information display
2
Continuously variable transmission: Check that the shift lever is set
in P. Firmly depress the brake pedal.
Manual transmission: Check that the shift lever is set in N. Firmly
depress the clutch pedal.
will be displayed on the multi-information display.
If it is not displayed, the engine cannot be started.
3
Press the engine switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal (continuously variable trans-
mission) or clutch pedal (manual
transmission) until the engine is
completely started.
The engine can be started from
any engine switch mode.
Stopping the engine
1
Stop the vehicle.
2
Continuously variable transmission: Shift the shift lever to P.
Manual transmission: Shift the shift lever to N.
3
Set the parking brake. (P. 183)
4
Press the engine switch.
5
Vehicles without a multi-information display: Release the brake
pedal (continuously variable transmission) or clutch pedal (manual
transmission) and check that the smart key system indicator light
(green) is off.
Vehicles with a multi-information display: Release the brake pedal
(continuously variable transmission) or clutch pedal (manual trans-
mission) and check that "POWER ON" on the multi-information dis-
play is off.
COROLLA_TMMMS_TMMC_U (OM12F00U)
4-2. Driving procedures
165
4