Handset Settings - Qualitel Eurofone 210 User Manual

Eurofone 210
• Press the End call key to transfer the call to the other handset.
Conference
You are conducting an external call.
• Press , select Intercom, Press OK, select the desired handset
number of the internal party.
• Press the Star key for approx. 3 sec. when the internal party responds.
The three call partners are connected.
• Any teleconference partner can press the End call key to leave the
conference and end the call.

Handset settings

• Press , select HS Settings and press OK.
• Select a function from the following list:
-Alarm– The activated alarm is displayed in standby mode by
The alarm sounds for 30 seconds or can be deactivated
immediately by pressing any key. The volume is the same as for
the ringtone.
- Ring Setup– Select the desired ringer melody for internal
and external calls.
- Tone Setup– Activate or deactivate the following options:
Key Tone– Every time a key is pressed, a brief beep is heard.
Battery Tone– The batteries are almost empty. Insert the
handset in the base station for charging.
Out of Range– A warning beep is sounded if you exceed
the maximum range.
-Language– Choose the language for the display texts.
-Rename HS– To better distinguish between handsets, you can
give each hand-set a name.
-HS display– Select time or handset name for idle mode
display.
-Auto Answer– Just pick up the handset from the base to
answer a call (without pressing any key).
.
14