Eurofone 210 Introduction Thank you for purchasing our product which adopts excellent workmanship and exceptional reliability. Your telephone is designed to give you flexibility in use and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes to read through this instruction manual to familiarize yourself with all the features of the product.
Eurofone 210 Safety Instructions When using your telephone instrument, the following basic safety precau- tions should always be followed to reduce the risk of fire, electric shock and injury to persons: • Read, understand and follow all warnings and instructions.
Mute the Handset Microphone Keypad lock Paging – Locate mislaid handsets Phonebook Call list Voicebox (network answering machine) Extending the Eurofone 210 Converse with several call partners Handset settings Base station settings Reset the Phone Appendix Care and Warranty Conditions...
Delete characters / Back in a submenu / Long press in standby: back to idle / In idle mode: Internal call. During conversation: Base Station Eurofone 210 Mute handset micro-phone. Base Station Eurofone 210: Paging key...
Eurofone 210 Display symbols Scroll up/down in a list or menu. Symbol is displayed when the handset is within range of the base station. Flashes when the handset is out of range or not registered to the base. Internal call in progress. Flashes for incoming internal calls.
Battery advice Use only the original batteries (2 x NiMH, AAA, 1.2 V 500mAh) as well as the original power supply (6 V DC / 300 mA) for Eurofone 210. The handset operating times (standby 100 hours/active 10 hours) and charging times apply only if the battery is charged to the defined minimum capacity (1.2 V / 500 mAh).Charging is electronically controlled to ensure...
Eurofone 210 Connecting the phone • Before you can start using your telephone you must plug in the telephone connector cable and the mains cable. • Insert the batteries in the battery compartment. Make sure the polarity is correct. •...
Eurofone 210 press OK, Select desired Language, Press OK Set date • Press , select HS Settings and press OK. • Select Date & Time and press OK. • Date format displays on LCD, press OK. • Select date and time format. Press OK. (Scroll through the list using the navigation keys) •...
Eurofone 210 Turn off the ringer Press key for approx. 3 seconds in standby mode: the ringer is switched off. The ringer icon is displayed on the LCD. To turn the ringer on, press again for approx. 3 seconds. When a call is signalled (you hear the ringtone), press key .
Eurofone 210 Mute the handset microphone You can temporarily mute the handset microphone to talk to someone else in the room without the caller hearing. Press key during a conversation. To reactivate the microphone, press key again. Keypad lock Activate keypad lock •...
Eurofone 210 NOTE: The pause “P” is useful when the Eurofone 210 is connected behind a PABX. Where the PABX requires a second dial tone the pause “P” must be inserted between the PABX access number (normally 0 or 9) and the telephone number.
You can register up to 5 handsets to your base station. If you register your Eurofone 210 handset with a “third party” base station or a “third party” handset on your Eurofone 210 base station (GAP), you may not be able to use some functions or only to a limited extent.
Eurofone 210 Register new handsets Accessory handsets must be registered to the base station. The base station must be set for registration mode (Declaration). • Press on the base station for approx. 5 seconds before declaration, then release the key.
Eurofone 210 • Press the End call key to transfer the call to the other handset. Conference You are conducting an external call. • Press , select Intercom, Press OK, select the desired handset number of the internal party. •...
Internet or cable telephone adapter, not all the described features (in par- ticular caller identification) may function in the same way as with a standard analogue telephone line. This does not mean that the Eurofone 210 is mal- functioning Several factors can cause a failure of specific features to function: •...
Eurofone 210 format. If this happens, please check the Eurofone 210 on an analogue fixed line and/or contact your Internet/cable telephony provider. Care Your telephone is a sophisticated product in terms of design and construc- tion, and should therefore be handled with care. To clean the telephone, wipe first with an antistatic cloth or a damp, soft leather cloth and then dry using a dry cloth.