Advertisement
Quick Links
Advertisement
Related Manuals for Qualitel Eurofone Combo C33-B
Summary of Contents for Qualitel Eurofone Combo C33-B
- Page 1 Eurofone C33-B & C33-W User manual...
- Page 2 Contents of the package 1 base station 1 connector cable 1 mains adapter 6 VDC / 300mA 1 handset 2 rechargeable batteries NiMH AAA 500 mAh 1 user manual Location To obtain the best possible range, we recommend positioning the telephone in a location central to your sphere of activity.
- Page 3 Setting up the telephone Setting up the base station Do not expose the base station to direct sunlight. Protect the base station against moisture. Do not position the base station in rooms exposed to condensation, corrosive steam or excessive dust. Condensation can be present in basements, garages, conservatories or sheds.
- Page 4 Setting up the telephone Connecting the phone Before you can start using your telephone you must plug in the telephone connector cable and the mains cable. Safety note Use only the supplied mains adapter 6 vdc / 300 mA for the base station. ①...
- Page 5 Inserting the two rechargeable batteries (note the polarity!): Insert the batteries in the battery compartment. Make sure the polarity is correct. Insert the batteries so that the flat end (negative polarity) of the battery is pressing against the spring. The handset will not function if the batteries are incorrectly inserted.
- Page 6 Setting up the telephone Once the new batteries have been inserted, the display on the handset indicates the actual charging status only after a complete charging cycle. Note You can replace the handset in the base station after every call. Charging is electronically controlled to ensure optimal charging of batteries in different charge states.
- Page 7 Get to know your telephone Handset keys...
- Page 8 Getting to know your telephone...
- Page 10 Getting to know your telephone Switch handset on/off • Press and hold the End call key (approx. 5 sec). • Press and hold the End call key to reactivate the handset. About the menus Menu navigation In standby when pressing the soft key under Select the menus with the navigation key Press OK to confirm.
- Page 11 Telephoning Making an external call Press , wait for the dialling tone and dial the number. Call preparation 1. Enter the number. If you enter an incorrect number, you can: • delete it by pressing repeatedly the right softkey. • move the cursor to the desired character by pressing the navigation key (left/right).
- Page 12 Telephoning Handset/handsfree volume You can adjust the handset and handsfree loudspeaker volume independently in 5 steps. Press during a call to adjust the volume. The selected setting is saved after the end of the call. Handset secrecy 1. Press during a call. This switches the microphone off and your caller cannot hear you.
- Page 13 Telephoning Deleting individual entries/entire redial list Press to open the redial list. Use to scroll through the list until you reach the entry you are seeking. Press the soft key under and delete the entry or the entire list. Copying numbers from the redial list to the phonebook Press to open the redial list.
- Page 14 Telephoning Group call (paging) You can activate a group call to locate a mislaid handset. 1. Press the paging key on the base station. You will hear an acoustic signal on the handset(s) registered with the base station. 2. Press the paging key again to end the ringing signal or press key on the handset.
- Page 15 Telephoning Internal calls You can call other handsets which are registered with your base station. This allows you to make internal calls free of charge. 1. Press the soft key under , select the relevant handset number and press OK to confirm.
- Page 16 Telephoning Conference You have two active calls (1 internal and 1 external), one of which is on hold. 1. To connect all three call partners with each other, press and hold until CONFERENCE appears. 2. Press to end one of the calls. The remaining call partners are automatically connected with each other.
- Page 17 Phonebook You can store up to 50 names and numbers in the phonebook on each handset. Every entry contains a name and telephone number. Names can be up to 12 letters long and numbers up to 20 digits long. Phonebook entries Adding a new entry If the telephone is in idle mode: 1.
- Page 18 Phonebook Dialling numbers from the phonebook 1. Press to open the phonebook. 2. Use to scroll through the phonebook, select the entry you are seeking and press . The number is displayed and dialed. You can also search by name: press the first letters of the name and press Editing entries 1.
- Page 19 Call list* If your network operator supports caller ID presentation* (CLIP), the caller’s number (if he did not not withheld his own number) is displayed before you accept the call. The call list can hold up to 20 entries. If the list is full, the oldest entry is overwritten by the most recent entry.
- Page 20 * Function dependent on network operator. Contact your network operator to find out whether this service is supported Voicebox (Network answer machine) Many network operators offer the option of setting up a network answer machine (voicebox). To use the network answer machine, you need to send certain codes to the network.
- Page 21 Handset settings HS SETTINGS 1. Press the soft key under . Select and press OK to confirm. 2. You have then the following options: ALARM Activate the alarm function, enter the desired alarm time and SNOOZE activate or deactivate the function.
- Page 22 HS DISPLAY Select the handset display in idle mode (handset name or time). AUTO ANSWER An incoming call can be accepted by pressing the talk key. If activate Auto Answer, you can accept a call simply by lifting the handset from the base station without pressing any key. DATE &...
- Page 23 LONG corresponds to 600 ms Contact your network operator for details. On delivery, the flash time is set to the value for the country in which you have purchased the telephone CHANGE PIN You can change the system PIN (0000 by default). ECO RANGE See chapter “ECO Range / Fulleco".
- Page 24 BS SETTINGS 1. Press the soft key under . Select and press OK to confirm. 2. You have then the following options: ECO RANGE HALF RANGE You can reduce the range of the base ( ) or set FULL RANGE FULLECO Activate or deactivate the function.
- Page 25 2. Release the Paging key when you hear a beep on the base station. REGISTRATION 3. On the handset, press the soft key under . Select and press OK to confirm. Select the base station, enter the base station system PIN (default on delivery: 0000) and press OK to confirm.
- Page 26 This analogue telephone DECT complies with the basic requirements contained in the R&TTE Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and is suitable for connection and operation in the member state indicated on the base station and/or packaging. The declaration of conformity may be viewed at: www.qualitel.co.za...
- Page 27 Warranty conditions Your telephone is subject to a six month guarantee from the date of purchase. As evidence of the date of purchase, please keep the sales receipt. All defects attributable to material and manufacturing faults will be corrected free of charge within the warranty period, either by repairing or replacing the defective equipment.
Need help?
Do you have a question about the Eurofone Combo C33-B and is the answer not in the manual?
Questions and answers