Advertisement
Installing Cleansing Heads
To Attach Heads
Press the head (included) onto the
connection hexagon shape pin until it
locks into position with a click.
To Remove Heads
If replacing the brush head, gently pull
brush head to remove. For best
results, replace the brush head every
three (3) months, or sooner if the
bristles become depressed.
Pad Fastener Head
The Pad Fastener Head accepts any type of cotton or synthetic
type of makeup remover pad. Simply attach pad to the textured
fastener.
Daily Treatment
Step 1: Remove makeup
Step 2: Dampen face with warm water.
Step 3: Select Pad or Silicone Head options.
Step 4:
Using the Pad Fastener Head: Attach any brand of pads (soak
with makeup remover cleanser), pre-soaked pads or towelettes.
Using Silicone Cleansing Head: Apply makeup remover to the
skin. Press the Makeup Remover Power Cleanser to treated area
and turn on. Press Power Button once for high power or press again
for low power, speed is dependent on sensitivity of skin type. Press
rmly to treated area and move the Makeup Remover Power
Cleanser in an upward, circular motion.
Advertisement
