Attaching The Appliance To The Installation Niche - Miele F 1801 SF Operating And Installation Instructions

Installing the appliance
Attaching the appliance to the
installation niche
^ Open the appliance door.
^ Fasten the appliance on the left and
right hand sides with the 3 (supplied)
wood screws.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
Now connect the water supply to the
appliance (see "Plumbing").
63
Attaching the toe-kick cover
The maximum height of the toe-kick
cover is 4" from the top of the floor.
Do not cover the ventilation slits in
the plinth. Risk of damage to the
appliance.
^ If required, cut the toe-kick cover to
the required length and height.
^ Attach the plinth to the appliance,
and put the included cover plates in
place.