Adjusting The Interior Fittings; Moving The Shelves; Freezer Baskets - Miele F 1801 SF Operating And Installation Instructions

Moving the shelves

The shelves can be adjusted according
to the height of the food.
^ Using both hands, grasp the shelf
from underneath and lift slightly so
that the rear of the shelf is slightly
above the mountings.
^ Pull the shelf forward.
^ Move the shelf to the desired height,
then insert the (rear) hooks into
place.
^ Make sure the shelf is level.
Top shelf
^ Lift the shelf up and out.
^ When replacing the shelf, make sure
that the latches on the corners at the
back are correctly engaged.
Adjusting the door shelves
For easier loading, unloading, and
cleaning, the door shelves can be
shifted or completely removed.
^ Using both hands, grasp the door
shelf by the frame and tip it slightly
forward.
^ Slide the tipped shelf up or down
along the slide-rails, and click it into
place with the lower hooks.
^ Make sure the shelf is level.
Removing a door shelf
^ Slide it upward all the way to the top
of the slide-rails, until it can be
removed.

Adjusting the interior fittings

Replacing a door shelf
^ Start at the top of the slide-rails and
slide the shelf down into the desired
position.

Freezer baskets

For easier loading, unloading, and
cleaning, the freezer baskets can be
shifted or completely removed.
^ Pull the basket forward until
resistance is felt.
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
^ Using a suitable object, e.g., coin,
turn the safety lock to a horizontal
position .
^ On both sides of the basket, pull the
latches upward and lift the basket
out of the freezer.
Replacing the freezer basket
^ Fully extend the telescopic tracks.
^ Lay the basket onto the tracks so that
it connects in the front and back.
^ Turn the safety lock back to the
vertical position.
^ Slide the freezer basket in.
23