Miele F 456 i-3 Operating And Installation Instructions page 43

^ Securing the appliance door to the
furniture door:
– Secure bracket a to the appliance
door by screwing hexagon-headed
screw b through the pre-drilled
holes in the appliance door.
– Check that the two metal edges c
are flush (see symbol II ).
– Drill fixing holes d, and screw in the
short 4 x 14 mm chip board screws
e.
– Align depth "Z" on the furniture door:
Loosen screws f at the top of the
appliance door, and loosen the
hexagon-headed screw g at the
bottom of the fixing bracket. By
moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
Close the door and align it with
neighbouring furniture doors.
Building in the appliance
(On large or divided doors, attach a
second pair of fixing brackets a in the
handle region of the door. Use the pre-
drilled holes in the appliance door).
^ Place all covers in position.
43