Miele OPTIMA SERIES G 2420 Operating Instructions Manual page 41

Issue
Dishes are not dry,
glasses and cutlery
are spotted.
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
Possible fault
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
A "2 in 1" product was used.
These products have a low
drying effect.
The Detergent setting "2 in
1" or "Gel" is turned on, but
another product was used.
Not enough rinse aid was
used.
The salt container is empty.
The salt container lid was
not correctly screwed on.
Unsuitable "2 in 1" or "Gel"
products were used.
The automatic water
softener unit is defective.
Frequently asked questions
Fix
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Leave dishes in longer, see
"Use".
Set the Detergent setting to
"Powder" and add rinse aid.
Set the Detergent setting to
the detergent used, see
"Detergent settings".
Increase the dosage, see
"Before using for the first
time".
Refill the salt container, see
"Before using for the first
time".
Reseat it making sure it
screws back on correctly.
Change detergent, use
normal tabs or normal
powder detergent.
Contact Miele's Technical
Service.
41